( 0 items )
Your cart is empty.
shipping

KK V5.5 multicopter Controller Black Board V2.1 Program

SKU: 000119
0.3Kg
Free Shipping

$22.99

Submit a wholesale Inquiry
23 reward points
Qty: Unit(s)

  • Add to WishLists
  • Add a price reduction notification
  • Add a product notice of arrival

you share on admin



KK V5.5 multicopter Controller Board V2.1 Program

The KKmulticopter is a KK flight controller board for remote control multicopters with 2,3,4 and 6 rotors. We get KKmulticopter to stablise the aircraft during flight. KK flight controller takes the signal from the three gyros on the board (roll, pitch and yaw) and feeds the information into the Integrated Circuit (Atmega IC). KK flight controller then processes the information according the the KK software and sends out a control signal to the Electronic Speed Controllers (ESCs) which are plugged onto the board and also connected to the motors. Depending upon the signal from the IC the ESCs will either speed up or slow down the motors (and tilt the rear rotor with a servo in a Tricopter) in order to establish level flight.

The board of KKmulticopter also takes a control signal from the Remote Control Receiver (RX) and feeds this into the IC via the aileron, elevator, throttle and rudder pins on the board. After processing this information, the IC will then send out a signal to the motors (Via the M1 to M6 pins on the board) to speed up or slow down to achieve controlled flight (up, down, backwards, forwards, left, right, yaw) on the command from the RC Pilot sent via his Transmitter (TX). In the case of a Tricopter, one of the pin connectors (M4) will control a servo to achieve yaw authority.

The v.5.5 has an Atmega168 chip on board and an ISP header which gives users the option to tweak and upload their own controller code.

Features:

- Simple structure, KKmulticopter is easy to Maintain and Debug Control
- With 3 pcs gyros, relying on potentiometer adjust gyro sensitivity.
- Full servo signal output, support normal ESC / analog servo
- Support for single-axis / UFO, Y3 3-axis, Y4-type 3-axis, 4 axis, 6 axis, V22  flight mode
- Supports 4-axis "+" and "X" flight mode, support for six-axis "HEXA6" and "Y6"  flight mode.
- Don't need MK 4-axis PPM decoder board, the receiver can be connected directly  to the Transmitter

Package included:

1*4-axis Circuit Board

 


There are currently no product reviews.
NOTE: Reviews require prior approval before they will be displayed

    UUUSTORE Return Policy

    Before returning items to us, please read and follow the instructions below.Please make sure that you understand our return policy and ensure that all criteria are met before physically sending any items back to us.

    UUUSTORE.com reserves the right to charge a handling fee on all returned products.

    General Returns

    1.  All products must be returned in their original condition.

    Please note that we cannot process any products that are returned without our prior knowledge. If you wish to return any or all parts of your order, you will need to contact customer service via Help Center  and obtain a "Product Return" form that must be included with your package.

    2.  Mis-shipped products: For mis-shipped items (item shipped was not item ordered), once confirmed, we will be responsible for an item exchange and any shipping fees. If you so choose, you can also return the product and get a full refund plus the shipping and handling fee.

    3.  Color Errors: If the color of the item received is not what was ordered, you are eligible for a full refund. (This does not apply if the color difference is caused by your display monitor.)


    Returning for replacement and refund

    1.  Quality Issues:

    We will be responsible for an exchange or refund if there are any product quality problems within 30 days of the Customers receiving the item. Customers may need to send the product back to China, and after confirming that the product has not been damaged on purpose, we will exchange the product or offer a refund.

    2.  Non Quality Issues:

    If a customer returns a product, within 7 days after receiving it, for non quality reasons, we will offer an 75% refund.(25% is for the shipping fee which cannot be returned)

    Returned products should be in brand new condition with original packaging. If any accessory or the original item was lost during the process of returning, we will deduct the price of the lost item from any refund.

    Canceled orders (Before delivery)

    If an order is canceled before delivery, there will be no costs incurred.

    Wrong Item Delivered

    After confirming the wrong item has been sent, we will exchange your item or fully refund the item and pay for shipping both ways.


Customer Videos: See all 0 videos
Customer Images: See all 0 images
Tuesday 05 November, 2013

This product was added to our catalog on Tuesday 05 November, 2013.

LiveZilla Live Help