( 0 items )
Your cart is empty.

Pixhawk 2.1 Standard Autopilot Flight Controller + Here GPS GNSS Combo

SKU: 0002164


Submit a wholesale Inquiry
466 reward points
Manufactured by: UUUSTORE
Qty: Unit(s)

  • Add to WishLists
  • Add a price reduction notification
  • Add a product notice of arrival

you share on admin

Pixhawk 2.1 Standard Autopilot Flight Controller + Here GPS GNSS Combo 

Get Started on your road to Autonomy!
This Standard Kit contains the following items:
  • Pixhawk 2.1 Cube.... the brains behind the operation.
  • Pixhawk 2.1 Standard Carrier Board (not compatible with Intel Edison Chip)
  • 1 x Power Brick (two power bricks can be fitted for redundant power.)
  • Cable set that allows you to connect to your old Telemetry module, GPS, and sensors
  • 1 x Here GNSS GPS Module 
  • 1 x GPS1 port connector for connecting Here GNSS to PH2 
  • SD Card (inserted in Cube) 
  • 2 x Telem cables
  • Power Cable
  • I2C Cable
  • Buzzer Cable
  • Micro USB cable
  • GPS1 cable (with safety switch)
  • I2C Splitter
  • 4 x Mounting screws (M2.5*8)
  • 3M Double Sided Foam Tapes


The goal with Pixhawk2 was not just to update Pixhawk but, to fundamentally redesign the entire experience while maintaining the independent, open-hardware design. Pixhawk2 is the world’s most advanced open autopilot system aimed at meeting the needs of the academic, hobby and industrial communities at low cost and high availability. Utilizing the advanced APM firmware, Pixhawk2 turns any remote controlled plane, copter, or rover into a full-featured professional drone.
The “Cube”
The Pixhawk2 has been designed for hobbyists and professionals alike. The “cube” is the center of that philosophy, providing all the functions expected from a modern autopilot with one simple interface. The 80pin DF17 connector seamlessly attaches to the carrier board for a complete standalone autopilot or can be used by OEM’s to design carrier boards for custom solutions.
Boasting triple redundant IMU’s with vibration isolation and built-in heat control for operation in low-temperature environments, the Pixhawk2 Cube is second to none.
The “Carrier”
An integrated, single board / box flight controller.
All-in-one design with integrated FMU and IO and lots of I/O ports.
Improved ease-of-use.
Improved sensor performance.
Improved microcontroller resources.
Increased reliability and reduced integration complexity.
Separate power supplies for FMU and IO (see power architecture section).
On-board battery backup for FMU and IO SRAM / RTC.
So much I/O
14 PWM ports, five general purpose serial ports, three analog inputs, two I2C ports, two CAN Bus interface ports and, an SPI port make Pixhawk2 more than capable for most applications without the need for expansion. This is broken out on the carrier board for use with; GPS, Telemetry, External USB, RGB LED and safety switch, airspeed sensors, CAN bus ESCs, power modules and much much more.
Here GPS Highlights
Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
Industry leading –167 dBm navigation sensitivity
Security and integrity protection
Supports all satellite augmentation systems
Advanced jamming and spoofing detection
Other Here GPS features
Breakaway mount
Notification RGB LED
HMC5983 MAG, and LIS3MDL Mag 
6CM Ground plane

There are currently no product reviews.
NOTE: Reviews require prior approval before they will be displayed

    UUUSTORE Return Policy

    Before returning items to us, please read and follow the instructions below.Please make sure that you understand our return policy and ensure that all criteria are met before physically sending any items back to us.

    UUUSTORE.com reserves the right to charge a handling fee on all returned products.

    General Returns

    1.  All products must be returned in their original condition.

    Please note that we cannot process any products that are returned without our prior knowledge. If you wish to return any or all parts of your order, you will need to contact customer service via Help Center  and obtain a "Product Return" form that must be included with your package.

    2.  Mis-shipped products: For mis-shipped items (item shipped was not item ordered), once confirmed, we will be responsible for an item exchange and any shipping fees. If you so choose, you can also return the product and get a full refund plus the shipping and handling fee.

    3.  Color Errors: If the color of the item received is not what was ordered, you are eligible for a full refund. (This does not apply if the color difference is caused by your display monitor.)

    Returning for replacement and refund

    1.  Quality Issues:

    We will be responsible for an exchange or refund if there are any product quality problems within 30 days of the Customers receiving the item. Customers may need to send the product back to China, and after confirming that the product has not been damaged on purpose, we will exchange the product or offer a refund.

    2.  Non Quality Issues:

    If a customer returns a product, within 7 days after receiving it, for non quality reasons, we will offer an 75% refund.(25% is for the shipping fee which cannot be returned)

    Returned products should be in brand new condition with original packaging. If any accessory or the original item was lost during the process of returning, we will deduct the price of the lost item from any refund.

    Canceled orders (Before delivery)

    If an order is canceled before delivery, there will be no costs incurred.

    Wrong Item Delivered

    After confirming the wrong item has been sent, we will exchange your item or fully refund the item and pay for shipping both ways.

Customer Videos: See all 0 videos
Customer Images: See all 0 images
Saturday 27 May, 2017

This product was added to our catalog on Saturday 27 May, 2017.

LiveZilla Live Help