2018 CUAV Pixhack V5 autopilot for FPV RC Drone Quadcopter Helicopter VTOL UAV flight simulator

Product Description

2018 CUAV Pixhack V5 autopilot for FPV RC Drone Quadcopter Helicopter VTOL UAV flight simulator

Quick Summary

• Main FMU Processor: STM32F765
  • 32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM
• IO Processor: STM32F100
  • 32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM

• On-board sensors:

  • Accelerometer/Gyroscope: ICM-20689
  • Accelerometer/Gyroscope: BMI055
  • Magnetometer: IST8310
  • Barometer: MS5611

• Interfaces:

  • 8-14 PWM outputs (6 from IO, 8 from FMU)
  • 3 dedicated PWM/Capture inputs on FMU
  • Dedicated R/C input for CPPM
  • Dedicated R/C input for ppm/DSM and S.Bus
  • analog / PWM RSSI input
  • S.Bus servo output
  • 5 general purpose serial ports
  • 4 I2C ports
  • 4 SPI buses
  • 2 CANBuses with serial ESC
  • Analog inputs for voltage / current of 2 batteries
• Power System:
  • Power: 4.3~5.4V
  • USB Input: 4.75~5.25V
  • Servo Rail Input: 0~36V
• Weight and Dimensions:
  • Weight: 90g
  • Dimensions: 44x84x12mm
• Other Characteristics:
  • Operating temperature: -20 ~ 80°c(Measured value

V5 advantages:

1. Support RTK centimeter positioning;

2, modular design is easy to integrate;

3. Built-in 3 sets of IMU redundancy;

4. Rich I/O ports;

5, the metal shell built-in shock absorption;

6, support a large number of rich models.

More details check our doc center:

Specifications:

size:

89*42.5*33mm

weight:90g

Packge weight: 400g

Package list:

PIXHACK-V5 *1

16G memory card *1

HV-PM high voltage voltage and current module + wiring *1

PW-link wifi data transmission module + wiring *1

Safety switch & buzzer + wiring *1

USB to TTL debugging small board + wiring *1

USB cable *1

CAN wire *2

RSSI signal line *1

I2C line *2

ADC6.6 line *1