2019 New Pixmaker3 Open source Flight Controller IMU Sensor CUBE Moudule+Multifunction Board FC VS pixhawk/pixhawk2 Pixhack

SKU: DEMYYPUTJBYE Category: Tag:

$146.21$601.64

Clear
Compare

Product Description

2019 New Pixmaker3 Open source Flight Controller IMU Sensor CUBE Moudule+Multifunction Board FC VS pixhawk/pixhawk2 Pixhack
For RC Model FPV Fixed Wing Multi-rotor VTOL
-CUBU+ full function carrier
CUBE : 38. 7mmx38. 9mmx22mm (compatible with pihawk2 backplane)
Carrier Board: 85. 4mmx44mmx 18. 3mm (the thinnest part 13.41mm)
The above size already includes built-in digital transmission (3DR Radio, Xbee, P900, etc.)
-Common interface:
1. Serial port x 5 (TELEM1 has 1. 5A power supply capacity, TELEM1 and TELEM2 have hardware
flow control function)
2. CAN x2,12C x2,buzzer interface x1 safety switch interface x1
3. 3.3v and 6.6v AD conversion special interface4. Equipped with USB extension special
interface (convenient for debugging after flight control is built in and USB is extracted
from the body)
5. Special interface for Spektrum D SM/D SM2 / d sm-x satellite reception
6. Support FUTABA s. BUS input and output
7. Support PPM remote control signal input (share the same interface with s. BUS input)
8. Support RSS I signal input (PMM or voltage form)
9. Both main processor and coprocessor have SWD hardware simulation development interface
-Unique interface:
1. P900 Radio, 3DR Radio,Xbee 900HP, Inel Edison and other customized modules can be built
into the carrier
2. with two MMCX antenna output interface, support dual antenna module
Unique features:
Sensors:
1. Tri-redundant IMU+ tri-redundant magnetometer
2. Upgrade and use L3GD20H (high-precision gyroscope) +1ST8310(anti-interference
magnetometer)
Shielding design:
1. The PSM module and power module are customized with diamagnetic copper shielding cover
2. CUBE is coated with metal shielding paint
Thermal design.
1. Enhanced IMU constant temperature design, minimum operating temperature -25°
2. The main processor is assisted to dissipate heat through the frame, with a maximum
operating temperature of 65
°
Expanding:
1. P900 Radio, 3DR Radio,Xbee 900HP, Inel Edis on and other customized modules can be built
into the board
2, with two MMCX antenna output interface, support dual antenna module
Option Meaning:
CUBE Moduel Only:
Pixmaker3 CUBE module*1.
Pixmaker3 Multifunction board * 1
San Disk industrial grade 8GTF memory card*1 piece
controller screw package (including 8*CUBE fixing screws, 8*base plate fixing screws)
Pixmaker3 Power kit
Pixmaker3 high voltage power standard kit
pixmaker3 CUBE module *1,
pixmaker3 full-function board * 1,
industrial 8G TF memory card*1
unlocker + buzzer*1,
pixmaker3 12C extension board (with signal relay)*1,
PPM encoder*1
data cable of s.bus*1
Micro USB Data cable *1
High voltage version power module (Max support 60V,Instantaneous 140A Power input)*1,
data line of power module*1
Controller screws package (including 8 pieces x cube fixed screw , 8 pieces * plate fixed
screw) * 1
Pixmaker3 With GPS
Pixmaker 3 high voltage power +GPS Kit
pixmaker3 CUBE module *1,
pixmaker3 full-function board * 1,
industrial 8G TF memory card*1
unlocker + buzzer*1,
pixmaker3 12C extension board (with signal relay)*1,
PPM encoder*1
data cable of s.bus*1
Micro USB Data cable *1
High voltage version power module (Max support 60V,Instantaneous 140A Power input)*1,
data line of power module*1
M8N GPS x1
GPS Support * 1
Controller screws package (including 8 pieces x cube fixed screw , 8 pieces * plate fixed
screw) * 1
Pixmaker3 Full set
With Inner P900

Origin

CN(Origin)

Material

Composite Material

Tool Supplies

Tools

Size

CUBE : 38. 7mmx38. 9mmx22mm

Technical parameters

Value 2

Model Number

For RC Model FPV Fixed Wing Multi-rotor VTOL

Remote Control Peripherals/Devices

Receivers

For Vehicle Type

Airplanes

There are no reviews yet.

Be the first to review “2019 New Pixmaker3 Open source Flight Controller IMU Sensor CUBE Moudule+Multifunction Board FC VS pixhawk/pixhawk2 Pixhack”