AIO FPV Kit 5.8Ghz 600mW 32Ch Wireless A/V transmitter Receiver TS832 RC832 Plus QAV250 DJI phantom Sj4000

Product Description

AIO FPV Kit 5.8Ghz 600mW 32Ch Wireless A/V transmitter Receiver TS832 RC832 Plus QAV250 DJI phantom Sj4000

5.8Ghz 600mW AV 32CH Transmitter TS832 and Receiver RC832 Plus

TS832 Specification:
Item Name: TS832 transmitter
Frequency: 5.8Ghz
Power input: 7.4-16V (3S Lipo suggested)
Transmitting Power: 600mA
Antenna Gain: 2db
Working Current: 220mA at 12V
Video Format: NTSC / PAL Auto
Video Bandwidth: 8M
Audio Bandwidth : 6.5M
Weight: about 22g
Dimension: 54x 32x 10mm(excluding antenna)
Connector: transmitter module side RP-SMA jack, antenna RP-SMA plug

RC832 Specification:
Item Name: RC832 receiver
Power Input: 12V
Working Current: 200mA max
Antenna Impedance: 50Ω
Antenna Gain: 2db
Video Impedance: 75Ω
Video Format: NTSC/PAL auto
Dimension: 80x 65 x15mm
Weight: about 85g
Connector: receiver module side RP-SMA jack, antenna RP-SMA plug

Features:
32 channels choice to get the best transmitting quality.
Compatible with A,B,E and F frequency bands
Super small 200mA current for 600mW wireless transmitter power.
Smaller size with lighter weight.
32 CH compatible to all FPV 5.8g receivers.
5.8G 600mW 32 Channels AV wireless FPV transmitter
600mW transmitter power assure 1KM distance in open area, 5-8 KM is available if work with the bigger gain antenna.

HD Monitor:

Rate: 800*480

The screen size: 154mm(width)*87mm(height)

Aspect ratio: 4:3 / 16:9(can choose switch by yourself)

Contrast: 350:1

Power: 12V

General consumption power: Around 6W

Size: 174mm(length)*114mm(width)* 23mm(height)

Hood Sunshade for 7 inch TFT FPV Monitor Description:

Material: Plastic

Color: Black

Size: 17.3* 12.5* 8.4cm

Weight: 73g

carbon fiber FPV Monitor Mount Holder Description:

Material: 2mm carbon Fiber.

Suitable for the transmitter, and display mast have fixed nut.

Light weight, High strength.

Suitable for 7inch or 8inch monitor.

Compatible with futaba 9c 10c JR 9c WFLY transmitter etc.

Total weight: 60g / 2.1oz

5-20V 800TVL CMOS FPV Board Camera

Chipset:1/3″ High Sensitivity CMOS sensor
System:PAL/NTSC (ship out PAL or NTSC according to different countries, eg. NTSC to USA, PAL to UK)
Resolution:800tvl
Mini Illumination:0.05lux
S/N:Ratio=52dB
White Balance:AUTO
WDR:WDR
Mirror:AUTO
D/N:AUTO
AGC:Auto
Language:ENGLISH
Sync Mode:INTERNAL
Video Output:1.0Vp-p, 75ohm
DNR:2D-DNR
Power:DC5V~DC20V
Current:50mA
Size:32X38 mm
Operating Temperature:-10C~50C
Operating Humidity: Storage Humidity:20~95%

1/3″ High Sensitivity:CMOS sensor
Auto color to black function
Up to 800TVL high resolution
Auto White Balance
Auto AGC
Low illumination: 0.05lux
Low current: 55mA DC5V~DC20V

Glass Fiber FPV Monitor Mount Holder

Features:
Material: 2mm Glass Fiber.
Suitable for the transmitter, and display mast have fixed nut.
Light weight, High strength.
Suitable for 7inch or 8inch monitor.
Compatible with futaba 9c 10c JR 9c WFLY transmitter etc.

Specifications:
Total weight: 60g / 2.1oz

How to use them? check this picture.

Connection diagram:

1 x 5.8Ghz 600MW TS832 Transmitter (with antenna and cables)

1 x RC832 plus Receiver (with antenna and cables)

1 x HD 800×480 Monitor

1 x Sunhood

1 x Remote controller mount support

Note: how to use it?

11.1V JST Plug lipo battery for the Transmitter.

11.1V 3.5MM DC Plug lipo battery for the Receiver.

11.1V or 12V 5.5MM DC Plug lipo battery for the Monitor.