Arkbird FPV OSD Autopilot 2.0 Lite Flight Controller System with M8N GPS Current Sensor FPV Aerial

Product Description

Arkbird FPV OSD Autopilot 2.0 Lite Flight Controller System with M8N GPS Current Sensor FPV Aerial

Specs:

Autopilot board

Dimensions: 57x42x22mm

weight:27.2g

M8N GPS

Dimensions:44x34x12mm

weight:22.6g

Whole set weight:200
g

Features:

1. High accuracy air-speed meter interface; with air-speed and ground speed control and protection; compatible with airspeed sensor.

2. New design of shell and internal framework; flight performance optimized.

3. 7 input channels and 7 output channels; with stability augmentation output on the PTZ.

4. Flap can be intelligent controlled by speed , channel1-7 (aileron-flaps) mix-control selectable; with slow release function, flap value can be displayed on the OSD.

5. More ways of mixed control include delta wing and V-tail wing, and Bi-motor plane, Bi-motor flying wing and butterfly brake (mixed control of 1247channel).

6. Analog RSSI port and PPM port; support Arkbird 433 10channel+RSSI single wire transmission.nsmission.

8 Basic functions:

1. Function all in one broad, on broad IMU (Inertial measurement unit), OSD (On Screen Display), barometer Attitude sensor, 12V-5V regulation chip, “ESC + voltage regulation” dual power supply. Industrial reliable designed.

2. Plug & Play design, no needed to weld any wire.

3.Can be installed flatwise or sidewise, suitable for small aircraft.

4. Intelligent PID controller. Easy to adjust.

5. Adjust parameters by OSD menu and radio stick.

6. Power & Video voltage, Go-home direction, radar mark, flight time, horizon, total distance, and power consumption, etc, can be displayed on Screen.

7. One button auto-leveling, stick back to center, plane can fly levelly. 8. One button RTH (return-to-home), lost radio signal return-home.

Package included:

1x Arkbird Autopilot System OSD

1x GPS module x1

1x Current sensor(3S,max amps:80)

All necessary connection cables

Manual: http://arkbirdfpv.com/pic/other/file/2017-01-11-23-51-182.pdf

If you use new 4S to 6S battery, we suggest you to select the third and the forth section(T and XT with New CS set) of our New Current Sensor, followed is connection :

”