EWRF e709TM3 5.8G 200mW 48CH FPV Wireless AV Transmitter Module 5V for F3 F4 Flight Controller

SKU: 647B26UI29UD Category: Tag:

Original price was: $57.66.Current price is: $28.83.

998 in stock

Compare

Product Description


EWRF e709TM3 5.8G 200mW 48CH FPV Wireless AV Transmitter Module 5V for F3 F4 Flight Controller

Product Description

Main Features

nAdjustable 4 powers:25mW/200mW/600mW/OFF

nCE/FCC certified- Default lock to restrict the power at 25mW/Pitmode and channels within legal bands in many countries

nClean powerup and channel switching without interference to others

nBeltflight/Cleanflight OSD setting of power,bands,channels and Pitmode

nOverheating protection in case of premature damage.

nAdditional protection allows for powering up without antenna

nPitmode(power is set to OFF) – test and set your quad without interference to others

nChannel changes and Pitmode setting through PWM

n2-6S input power supported

n5V BEC output for camera,RC receiver

n36x36 mm Standard size(30.5×30.5 mm mounting holes)

Specifications

Model: EWRF e709TM3(with DC 5V output)

nFrequency: 5.8G 48CH

nTransmitting Power:25mW/200mW/600mW/OFF

nPower supply:DC 6-25V(2-6S)

nSupply current(12V):140mA(25mW)/250mA(200mW)/300mA(600mW)

nPower output: DC 5V (800mA max)

nAntenna impedance: 50 ohm

nAntenna connector:MMCX Female( RP-SMA Male Pigtail)

nWeight:7.3 g

nDimension:36*36*7.65 mm

User Guide

1.Unlock & Lock

nDefault status of transmitter is in lock so that the power and some channels are not selected until the transmitter is unlocked(For HAM users only) .

nPress and hold the button C for almost 20 seconds on power up can lock or unlock the transmitter(dot on the digital display will flares until the L or U is on when hold the button).

nWhen L is on the digital display for seconds after power up indicates that the transmitter is in lock status while U on the digital display indicates that it is in unlock status.

2. Power setting (in unlock)

nPress and hold the button P to choose the power of 25mW/200mW/600mW.

nUse two short press to turn on/off the transmitting(Pitmode setting) and then the Red LED will be twinkles( on and off alternatively)or not respectively. When power is set to OFF(Pitmode is effective), you can set bands and channels without interference to others.The AV transmitting distance is only within 1-2 meters when it is in Pitmode.

nOnly the Red LED is on when the power is set to 25mW,both two lights of Red and Blue LED are on when set to 200mW, All three lights Red,Blue and Green are on when set to 600mW.

3. Band and channel setting

nPress and hold the button C to choose the band A-b-c-d-E-F(circle).

nPress the button repeatedly to choose the channel 1-8(circle).

nWhen PWM port is connected with a RC receiver, it can been used to change AV channels 1-8 and to shut transmitting ( Pitmode in effect)by a RC. Make sure that there is a PWM signal from the receiver within 3 seconds after powering up ,otherwise the transmitter is back to button-press setting mode . When in the setting mode of PWM, the dot on the digital display will glow

nBetaflight/Cleanflight OSD setting of power,bands,channels and Pitmode is supported, referring to‘Betaflight OSD setting of e708TM3’for details.

Frequency(Mhz)

Band

CH1

CH2

CH3

CH4

CH 5

CH6

CH7

CH8

A

5865

5845

5825

5805

5785

5765

5745

5725

b

5733

5752

5771

5790

5809

5828

5847

5866

c

5705

5685

5665

5645

5885

5905

5925

5945

d

5740

5760

5780

5800

5820

5840

5860

5880

E

5658

5695

5732

5769

5806

5843

5880

5917

F

5362

5399

5436

5473

5510

5547

5584

5621

The selections in red is inaccessible when the transmitter is locked.

Note:1.Make sure that there is enough space for airflow when installing the module on the drone in case the overheating protection starts to reduce the power even to shut down at the worst.

2. Please install the antenna before powering up for a longer use life.

3. Note that the use of transmitter in unlock status may violate the local

regulations in your country..

4.The maximum current of output DC 5V is 800mA.

Package Included:

1x 48CH 25/200/600mW Transmitter

1x Antenna Connector

1x Cable

Brand Name

uuustore

Origin

CN(Origin)

Material

Metal

Recommend Age

18+, 12+y

Tool Supplies

Cutting

Upgrade Parts/Accessories

Frame

RC Parts & Accs

Radio Systems

Use

Vehicles & Remote Control Toys

Remote Control Peripherals/Devices

Remote Controller

For Vehicle Type

Airplanes

Four-wheel Drive Attributes

Assemblage

MPN

Does Not Apply

Compatible Fuel Type

Electric

Model

EWRF e709TM3

Country/Region of Manufacture

China

Frequency

5.8G 48CH

UPC

889251276552

There are no reviews yet.

Be the first to review “EWRF e709TM3 5.8G 200mW 48CH FPV Wireless AV Transmitter Module 5V for F3 F4 Flight Controller”