FPV Combo System 5.8Ghz Transmitter Receiver no blue FPV Monitor 900TVL ccd Camera DJI Phantom QAV250 CX20 Quadcopter walkera

Product Description

FPV Starter Package 5.8G 5.8Ghz 200mw Tx TS351 and Rx RC805 + 800*480 TFT Screen FPV No blue monitor + Sunhood + 900TVL Camera + Monitor mount support FPV System Combo

1 x Boscam 5.8Ghz 8ch 200MW Transmitter (with antenna and cables)

1 x Boscam RC805 Receiver (with antenna and cables) x1

1 x 900TVL 140 degree 2.1MM Sony CCD lens HD Camera (with fpv cable)

1 x HD 7 inch 800×480 no blue Monitor (with T plug power cables)

1 x 7 inch monitor Sun hood

1 x Monitor holder for Remote controller

1 x T or XT60 plug power cable for the monitor and receiver

Customs Declaration:We will declare 10% Value and send the parcel as a gift for
tax avoidance
.

This item includes all cables,it is very easy to install,No soldering.

So the monitor and receiver can use one 3S lipo battery.

And the tranmsitter can use the 3S lipo battery from the drone.

How to use them? check this picture.

Connection diagram:

Sony 900TVL 170 Degree FPV Camera For RC QAV250 DJI phantom 2

Best camera for QAV250 F450 F550 DJI FPV.

Product Weight: 11g

Size: 35 * 35 * 35mm (not including bracket)

Imaging System: 900TVL ccd 140 Degree 2.1MM line color

Support format: PAL mode,(if you need NTSC mode,please note us)

800*480 TFT No blue Screen FPV monitor:

Specification:
The monitor is no blue when lose signal.
Display dimension: 7 inch
Dimension: 174 x 114 x 23mm (W x H x D)
Viewing area: 154.08 x 85.92 (H x V)
Resolution: 800 x 480 x RGB
Dot pitch: 0.05 x 0.15mm (W x H)
Viewing angle: L70°R70°U50°D60°
Panel type: TFT
Display color: 262K
Contrast ratio: 350:1
Aspect ratio: 16:9
Brightness: 220cd/m2
Interface type: Digital
The number of wiring: 50 PIN Digital(TTL) TCON
Back light: LED
Response time: 20ms
Operating temperature: -20°C to 75°C
Plug: 2 AV input, 1 DC input

5.8Ghz 200mW Tx TS351 and Rx RC805 Combo:

5.8Ghz 200mW transmitter(TS351) Specifications:

5.8Ghz 200mW transmitter(TS351). This system is Good for up to 500m flying with the supplied antenna. An optional directional antenna can extend range to 2km+. This unit a Includes built-in microphone. The receiver unit has additional AV outputs for video recording while using FPV goggles.

Features:

Output impedance: 50Ohm
Output power: 21~23dBm
Channels: 8
Transmitter operating voltage: 7~15VDC / 150mA
Receiver operating voltage: 5VDC
Operating temp: -10~85C
Video bandwidth: 0~8.0MHz
Audio frequency: 6.5MHz
Video input level: 0.8~1.2Vp-p
Video input impedance: 75Ohm
Audio input level: 0.5~2.0Vp-p
Audio input impedance: 10K/Ohm
Weight: 25g
Antenna connector: RP-SMA
Dimensions: 55x26x17mm

Channels

5.8G : 5705,5865,5665,5645,5885,5905,5925,5945MHZ

RC805 Receiver Specifications:

The RC805 5.8Ghz AV Receiver features a digital channel display and jumperless, one press channel selection. This receiver also includes an additional AV output for video recording while using FPV goggles.

Features:
Receiving sensitivity: Receiving frequency: ISM 5.8GHz 8CH
Antenna port: 50ohm RP-SMA
Antenna: Gain: 2dBi
Power supply: DC12V 220mA
Video output level: 1Vp-p @ 75ohm
Audio output level: 1Vp-p @ 10Kohm
Dimensions: 72.5×54.2×15.5mm
Weight: 52g (w/antenna)

Channels
5.8G : 5705,5685,5665,5645,5885,5905,5925,5945MHZ