GEPRC CineGO HD STABLE PRO F4 BLHELI32 35A Caddx Vista Digital HD GR1507 3600KV 4S 2800KV 6S 3inch FPV Cinewhoop Ducted Drone

Product Description

At present, due to the global chip supply shortage, For that we got a good scheme: The quadcopter’s camera was swapped into The Caddx Nebula Nano V2. The same good performance.Until July 2021.

Summary:

CineGO HD is the latest CineWhoop model of our team. It is equipped with the latest Caddx Vista high-definition image transmission. So far, it is the lightest Cine model. CineGO HD is mainly used for CineWhoop flight. Its ultra-light design is 30% lighter than traditional GoPro 7/8 aircraft. The whole machine is only 247g, and the flight experience is very flexible.

Features:

• No Propellers in view.
• With Caddx Vista Digital HD video transmission system, Goggle can record 720P video
• Equipped with a 3-inch tpu guard frame, Ensure safety and reliability
• Full 3K Carbon Fiber
• Flight Control System:STABLE F405 SYSTEM
• Two types of power. 6S version uses GR1507 2800KV motor. 4S version uses GR1507 3600Kv motor
• Full Soft Mounted FC System: Provides a clean operating environment for gyro.
• Exquisite Assembly Process: Eliminate any potential installation problems.
• Weight:247g(without battery and GoPro Mounts TPU)

Specifications:

Frame:

• Full 3K Carbon Fiber
• Top plate : 2mm
• Bottom plate : 3mm
• Side plate : 1.5mm
• Wheelbase : 155mm
• Motors: GR1507 2800Kv/3600Kv
• Propeller:GemFan 3018 (Three Blades)
• Recommended Battery:6S 1050mAh (No inclued)
• Recommended Camera:GoPro Hero 7/8(No inclued)
• Flight / Take off weight is less than 500g

Caddx Vista SPECS:

• Size: 30.45 x 29 x 13mm
• Weight: 19g
• Antenna Connector: U.FL
• 20×20 stack
• 200mw to 1200mw max output power
• Range 4km max
• 2S to 6S
• High quality mode 30-40 ms
• Low latency mode 21-28ms
• Compatible with DJI HD camera
• Compatible with DJI HD goggles

Electronic System(STABLE PRO F4 35A):

STABLE V2 F4 Flight Controller Specs:

• Model:STABLE F4 35A
• MCU: F405
• IMU: MPU6000 gyro/accelerometer (SPI)
• OSD: BetaFlight OSD w/ AT7456E chip
• Baro:NO
• BEC Output: 5V@3A
• Integrated LC Filter
• Firmware target: OmnibusF4SD
• Size: 26x26mm board, 20mm mounting holes (M2)

STABLE V2 F4 ESC BL32 2-6S 4in1 Specs:

• MCU:STM32F051
• Input:2-6s lipo
• Constant:35Amps
• Burst:45Amps
• Dimensions:31*31mm(including the power pads)
• Mounting Holes:20*20mm,M2
• Supports Dshot1200,Proshot,Oneshot,Multishot
• Current meter: Yes
• Target: GEPRC-BL32-4IN1

Include:

• 1x CineGO HD CineWhoop Quadcopter
• 4x 3inch Props(pairs)