GEPRC Thinking P16 4K GEP-12A-F4 AIO 5.8G 200mW Caddx Loris 4K GR1103 8000KV 3S 79mm 1.6inch FPV Tinywhoop Cinewhoop Drone
$227.90 – $273.90
Thinking P16 4K comes with the GEP-12A-F4 AIO which is a highly integrated and stable board that weighs only 5.6g.GEP-12A-F4 AIO gives you confidence while you are trying to push your Thinking P16 4K to its limit. GR1103 8000kv motors and 1.6” props combined with a 3S 300mah Lipo battery gives Thinking P16 4K a stable but responsive flying characteristic. This highly efficient powertrain gives you 4 minutes of indoor acrobatics.
Just like all other GEPRC quads, Thinking P16 HD has been pre-tuned and fully assembled by the GEPRC team before you receive it! Simply bind it to your transmitter or attach your favorite receiver, then you are ready to enjoy your all-new Thinking P16 HD.
- Build-in Caddx Loris 4K 60fps
- Whoop style frame with prop guards. Safe to fly indoor and around soft objects.
- Stable GEP-12A-F4 AIO flight control with Betaflight OSD.
- High-efficiency powertrain provides 4.5 minutes of indoor flying.
- Compact design, 79mm from the motor to motor.
- Weighs only 55g w/o battery and receiver.
- Item:Thinking P16 4K
- Flight Controller:GEP-12A-F4 AIO
- Camera: Caddx Loris 4K
- Motor to motor:79mm
- Propeller:Gemfan 1635
- Motor:GR1103 8000KV
- Weight:55.5g without battery
- Receiver:Without Receiver(PNP)/Frsky R-XSR / Frsky XM+ / FlySky A8S / TBS NanoRX
Flight Controller: GEP-12A-F4 AIO
- MCU: STM32F411
- OSD:BetaFlight OSD w/ AT7456E chip
- Firmware target: GEPRCF411
- ESC: 12A * 4 BLHeli_S (Dshot/Multishot/OneShot)
- VTX: 5.8GHz (48 Channel IRC Tramp,PIT/25/100/200mW)
- 1x Thinking P16 4K CineWhoop Drone
- 4x GEMFAN 1636
- 2x Battery strap 15*120
- 1x 1.5mm L screwdriver
- 1x 5.8G Antenna
|Camera Mount Type|
Fixed Camera Mount
|Video Capture Resolution|
12 Channel & Up
Thinking P16 4K
|State of Assembly|
|Operator Skill Level|
There are no reviews yet.