iFlight Mach R5 HD 215mm 5inch 6S FPV BNF with Caddx Nebula Nano Digital HD System / Beast F7 55A AIO board / XING2 2506 1850KV

Product Description

iFlight Mach R5 HD 215mm 5inch 6S FPV BNF with Caddx Nebula Nano Digital HD System / Beast F7 55A AIO board / XING2 2506 1850KV

Description：

• In response to our customer needs, this is our answer for all the racers in out there: The iFlight Mach R5 BNF!

• Equipped with XING2 2506 motors for more torque and efficiency as well as high speed and consistent lap times.

• We use Beast F7 55A AIO, the most powerful of our iFlight AIOs available currently.

• Quick-swap arm assembly for easy repair on your flying spot or race day.

• Enhanced canopy design with low wind resistance for maximum speed and efficiency.

FEATURES:

• Super durable design, 6mm arms and 7075 CNC middle plate

• Super lightweight but superpower with our newest XING2 2506 motors

• 55A powerful Beast AIO power at small footprint

• New Caddx Vista Nabula nano HD version

HIGHLIGHTS:

• XING2 2506 1850KV motors

• Beast F7 55A AIO board (SKU:B010373）

• Caddx Nebula Nano Digital HD System Kit

PRE-TUNED & PRE-SETUP:

• Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

• To restore lost tunes or updates, please check our linked article on”Firmware/Factory Dumps”

• Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

• Please check our linked article on”How to disable Angle-Mode, activate Acro-Mode”

• GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.

• Please check our linked article on”GPS Rescue Mode // Setup”

FRAME //：Mach R5

• Wheelbase: 215mm

• Main body dimension: 152*152mm

• Arm thickness: 6mm

• Bottom plate thickness: 3mm

• Top plate thickness: 2.5mm

• Middle Plate thickness: 2.5mm CNC 7075 aluminum alloy

• TPU Camera plate

• FC: 30.5*30.5/25.5*25.5mm/20*20mm

• FPV Cam:14mm /19mm Micro / 20mm

FC // Beast F7 AIO

Specification:

• MCU: BGA-STM32F745

• Gyro: MPU6000

• Blackbox: 16Mb Onboard Flash

• BEC output: 5V 2.5A

• Barometer: DPS310

• Connector: Micro-USB

• OSD: AT7456E

• FC Firmware：IFLIGHT_F745_AIO

• Mounting pattern: 25.5*25.5mm φ3mm

• Dimensions: 32.5*32.5mm

• Weight: 8.5g

ESC // 55A 2-6S

Specification:

• UARTs: 5

• Current Sensor: Yes

• Input: 2-6S LIPO

• Current scale: 200

• Constant: 55A / Burst: 60A

• BLHeli: BLHeli-S

• Telemetry: no

• ESC Firmware:BlheliS G-H-30 BLS

• Mounting pattern: 25.5*25.5mm/Φ3mm

• Dimensions:32.5*32.5mm

Mach R5 HD Quad BNF Included Components and Parts

• Prebuilt and tested Quadcopter

• 1x Mach R5 HD Frame

• 1x Caddx Nebula Nano Digital HD System Kit

• 1x Sigma LHCP Ipex/UFL5.8g antenna

• 2sets x Nazgul R5 3-blades (Set of 4 – Color may vary)

• 1×20*250mmMicrofiber PU Leather Battery Strap (Color May Vary)