iFlight Nazgul5 V2 240mm 5inch 4S 6S FPV Drone BNF with SucceX-E F4 45A stack / XING-E 2207 Motor / Caddx Ratel camera for FPV

SKU: 2FIWA5YZKUAZ Category: Tag:

$251.00$289.00

Clear
Compare

Product Description

Description:

  • Nazgul5 V2 is a 5″ size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

HIGHLIGHTS:

  • 5mm arm design for more durability
  • Easy-Swap arms
  • LED illuminated Logo
  • XING-E 2207 motors and NAZGUL 5140 props
  • 5″ version also fits 5.1″ style propellers
  • Popular True-X configuration
  • TPU crash-guards
  • Fits both 30.5x and 20x stacks

XL5 V5 frame specs:

  • SucceX-E F4 45A flight stack
  • XING-E 2207 FPV Motor(6S 1800kv / 4S 2750kv)
  • Wheelbase: 240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)

FACTORY SETUP and WIRING DIAGRAM:

  • This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.
  • Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
  • No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive

Nazgul5 V2 Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x XL5 V5 Frame
  • 1x Caddx Ratel, 2.1mm lens camera
  • 1x Albatross RHCP SMA 5.8g antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

FC // SucceX-E F4 Flight controller

  • MCU:STM32F405
  • Gyro:MPU6000
  • Betaflight OSD:YES
  • Blackbox:8MB
  • 4X Uarts(1 2 3 6 )
  • 8 x Dshot/Proshot/Oneshot output
  • 8 x individual ESC power/ signal pads
  • 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
  • VTX telemetry: YES
  • WS2812 led Strip:YES
  • Baro:No
  • Beeper:YES
  • Input:2-6S(Max 8S)
  • BEC:5V/2.5A cont
  • Firmware target : BETAFLIGHTF4
  • Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
  • Dimensions:36*36mm
  • Weight:7.6g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • Dimension: 40*43mm
  • Mounting Holes: 30.5*30.5mm/Φ3mm
  • Weight: 14.4g
  • Supports 2-6S Lipo input
  • STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
  • Current sensor: YES
  • BEC: NO
  • Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
  • Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

  • The output power is stable;
  • Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
  • Output 48 frequency points,
  • Frequency lock fast, the boot does not interfere with companions;
  • Built-in output power self-check function;
  • Full format video format: NTSC /PAL;
  • Wide input voltage range. low power consumption: 7V~36V,+12V/[email protected];
  • Small size:36*36*3mm
  • Mounting holes 4-M3
  • Lightweight: 7.2g(excluding antenna)

Specs:

Additional Suggested Parts

  • Battery 4S 1550mAh
  • Battery 6S 1300mAh
  • GoPro Mounts

Origin

CN(Origin)

Material

Carbon Fiber

Recommend Age

12+y

Tool Supplies

Battery

Upgrade Parts/Accessories

Frame

RC Parts & Accs

Antennas

Size

240mm 5inch

Use

Vehicles & Remote Control Toys

Quantity

1

Technical parameters

Value 2

Model Number

Nazgul5 V2

Remote Control Peripherals/Devices

Remote Controller

For Vehicle Type

Airplanes

Four-wheel Drive Attributes

Assemblage

Wheelbase

Bottom Plate

There are no reviews yet.

Be the first to review “iFlight Nazgul5 V2 240mm 5inch 4S 6S FPV Drone BNF with SucceX-E F4 45A stack / XING-E 2207 Motor / Caddx Ratel camera for FPV”