iFlight Nazgul5 V2 HD 5inch 240mm FPV Drone BNF with Caddx Vista/ Nebula Nano Digital HD System/SucceX-E F4 45A stack for FPV
Product Description
Description:
Nazgul5 HD?is a 5″ size BNF (Bind-and-Fly) quadcopter?with the DJI?Digital FPV system on it.?We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!
HIGHLIGHTS:
5mm arm design for more durability
Easy-Swap arms
LED illuminated Logo
XING-E 2207 motors and NAZGUL 5140 props
5″ version also fits 5.1″ style propellers
Popular True-X configuration
TPU crash-guards
Fits both 30.5x and 20x stacks
Nazgul XL5 HD frame specs:
SucceX-E?F4 45A flight stack
XING-E 2207?FPV Motor(6S 1800kv / 4S 2750kv)
Wheelbase: ? 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 400.8g (without battery)
FACTORY SETUP and WIRING DIAGRAM:
Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Please check our linked article on
Nazgul5 HD Quad BNF Included Components and Parts
Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1x Caddx Nebula Nano Digital HD System Kit
1x?Albatross LHCP?RP-SMA?5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
1x 20*200mm?Microfiber PU Leather Battery Strap (Color May Vary)
1x?20*250mm?Microfiber PU Leather Battery Strap (Color May Vary)
FC // SucceX-E F4 Flight controller
MCU:STM32F405
Gyro:MPU6000
Betaflight OSD:YES
Blackbox:8MB
4X Uarts(1 2 3 6 )
8 x?Dshot/Proshot/Oneshot output
8 x individual ESC power/ signal pads
1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
VTX telemetry: YES
WS2812 led Strip:YES
Baro:No
Beeper:YES
Input:2-6S(Max 8S)
BEC:5V/2.5A cont
Firmware target : BETAFLIGHTF4
Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
Dimensions:36*36mm
Weight:7.6g
ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
Dimension: 40*43mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Weight: 14.4g
Supports 2-6S Lipo input
STM32F051 MCU, 48Mhz Runs BLHELI?16.X?Firmware
Current sensor: YES
BEC: NO
Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
Target:?G-H-30 BLS 16.7
Additional Suggested Parts
DJI HD FPV Goggles
Radio Controller
Battery 4S 1550mAh
Battery 6S 1300mAh
GoPro Mounts
Important
The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.
Origin | CN(Origin) |
---|---|
Material | Carbon Fiber |
Recommend Age | 12+y |
Tool Supplies | Battery |
Upgrade Parts/Accessories | Frame |
RC Parts & Accs | Antennas |
Size | 5inch 240mm |
Use | Vehicles & Remote Control Toys |
Quantity | 1 |
Technical parameters | Value 2 |
Model Number | Nazgul V2 HD |
Remote Control Peripherals/Devices | Remote Controller |
For Vehicle Type | Airplanes |
Four-wheel Drive Attributes | Assemblage |
Wheelbase | Bottom Plate |
There are no reviews yet.