Input voltage: 5V
Output voltage and current: 5V 1A
Number of channels: 40CH
Transmitting power: 25/100/200/300/400mW
Control protocol: VTX IRC Tram
Installation hole distance: 16x16mm
Installation aperture: 3mm
Key operation instructions:
1.The image transmission supports the IRC Tram protocol to adjust the channel and power of the image transmission through the OSD and remote control, and also supports the switch of the power and channel through the button of the image transmission.
2.Short press; select CH1-8 cyclically, and the number of times the green light flashes represents the number of CHs.
3.Long press for 3 seconds; after long press for 3 seconds, the blue light will light up, continue to press and hold to cycle to select the frequency band FR A-B-E-F-R. Corresponding to the blue light flashes 1, 2, 3, 4, 5 times.
4.Long press for 6 seconds; after long press for 6 seconds, the red light will light up, continue to press and hold, cycle to select the power 25-100-200-300-400mW, corresponding to the red light flashes 1 time, 2 times, 3 times, 4 times, 5 times .
1x VTX16-400 FPV Transmitter
|RC Parts & Accs|
Vehicles & Remote Control Toys
|Remote Control Peripherals/Devices|
|For Vehicle Type|
|Four-wheel Drive Attributes|