JHEMCU ExpressLRS 900RX 915MHZ ELRS Radio Nano Long Range Receiver 11X18mm for FPV Racing Freestyle Long Range Drones DIY Parts

Product Description

0.6g JHEMCU 900RX 868/915MHz ExpressLRS ELRS High Refresh Rate Low Latency Ultra-small Long-range RC Receiver for RC FPV Drone

Specifications:

Brand Name: JHEMCU

Item Name: 900RX RC Receiver

Model: 900RX

Weight: 0.6g(without antenna)

Size: 11*18*3 mm

915M FCC type (AU EU updates the firmware by itself)

ESP8285 MCU

SX1276 RF

Frequency range: 915MHz FCC

Maximum receiving refresh rate: 500Hz

Minimum receiving refresh rate: 25Hz

Working voltage: 5V

Linking Binding steps:

– After the receiver is connected to the flight controller, connect the USB to power the flight controller. After inserting the USB for the first time, disconnect the USB as soon as the LED on the receiver turns off. Repeat the operation twice, when the USB is inserted for the third time, the LED will start to flash double, and the receiver will enter the code matching mode.

– After correctly connecting the 915M (868M) ELRS tuner module and the remote control, copy the ELRS.LUA file to the SD card in the remote control, the directory is SD Card/Scripts/tools, and then run ELRS.LUA for Bind operation.

– After the binding is successful, the LED on the receiver will become steady on, and the telemetry signal can be received at the same time.

Indicator status:

Double flash: code matching mode

Slow flashing: No transmission signal is received

Steady on: receive the transmit signal

Fast flashing: WIFI upgrade mode

Package Include:

1 x 900RX RC Receiver

1 x T antenna

4 x Wire