Currently Empty: $0.00
JHEMCU GSF405A AIO MPU6000 F405 Flight Controller BLHELIS 5A 4in1 1-2S ESC ELRS 2.4Ghz RX 25.5X25.5mm for FPV Drone RC DIY Parts
Product Description
The JHEMCU GS405A AIO features an F4 FC and a 5A ESC with built-in ELRS 2.4GHz receiver. This is an ultra-light 3.3g brushless AIO flight controller with 25.5×25.5mm mounting pattern!! This FC can handle 5A of continuous current and up to 2S. This AIO also features a built-in 8MB blackbox, buzzer interface, and camera interface.
GSF405A AIO FC has the built-in full ELRS receiver, connected on the UART1 port. It is not an SPI receiver, so it the ELRS firmware can be updated via Wi-Fi or Betaflight serial passthrough.
Features
- 5 serial ports (UART1, UART2, UART3, UART4, UART6), one I2C port, and one SBUS interface.
- Built-in 8MB blackbox and BMP280 barometer, buzzer interface, camera interface.
- ELRS firmware target is DIY_2400_RX_ESP8285_SX1280
- Onboard a WS2812 LED light, and WS2812 LED pads
- Built-in ELRS 2.4GHz Receiver
- F4 Flight Controller
- 5A 1-2S ESC
EXPRESSLRS 2.4GHZ RECEIVER
- Slow flashing: No transmission signal received
- Firmware: DIY_2400_RX_ESP8285_SX1280
- Working Agreement: CRSF (Betaflight)
- ELRS receiver indicator status:
- Steady on: Received transmit signal
- Double flash: code matching mode
- 1. Connect USB to power the flight controller.
- 2. After inserting the USB for the first time, disconnect the USB as soon as the LED on the receiver turns off.
- 3. Repeat the operation twice.
- 4. When the USB is inserted for the third time, the LED will start to flash double, and the receiver will enter the code matching mode.
F4 FLIGHT CONTROLLER
- UART: UART1 (ELRS), UART2 (external RC), UART3, UART4, UART6
- Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DSM2, DSMX
- Support programmable LED such as WS2812
- Gyroscope/Accelerometer: MPU6000
- Built-in voltage and current sensors
- Size: 25.5*25.5MM M2
- Barometer: BMP280
- Weight: 3.3 grams
- CPU: STM32F405
- Black box: 8MB
- Support buzzer
- USB: micro usb
- OSD: AT7456E
- IIC: Support
- BEC: 5V
5A ESC
- Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
- Firmware: BLHELI_S S_H_50_REV16_7.HEX
- Input voltage: 1S-2S Lipo
- Continuous current: 5A
Includes
- 1x JHEMCU AIO Board – GSF405A F4 FC + 5A 1-2S ESC w/ Built-in ELRS 2.4GHz Receiver
- 4x M2x6.5mm Rubber Shock Absorber
- 1x 470uf 35V Capacitor
- 1x 2.4GHz Antenna
- 1x 2S Series Board
- 1x 2mm Plug Cord
| Origin | CN(Origin) |
|---|---|
| Material | Composite Material |
| Recommend Age | 12+y |
| Tool Supplies | Assembled class |
| Upgrade Parts/Accessories | Adapter |
| RC Parts & Accs | Speed Controllers |
| Size | As Description Show |
| Technical parameters | Value 4 |
| Model Number | GSF405A AIO |
| Remote Control Peripherals/Devices | Starter |
| For Vehicle Type | Helicopters |
| Four-wheel Drive Attributes | Assemblage |
There are no reviews yet.