Matek MATEKSYS F405-SE BetaFlight F405 Flight Controller Built-in Osd PDB 5V/2A BEC Current Sensor for RC Drone Replace F405-CTR

Product Description

Matek MATEKSYS F405-CTR BetaFlight F405 STM32F405 Flight Controller Built-in Osd PDB 5V/2A BEC Current Sensor for RC Multicopter

Package Including

1x F405-SE/F405-CTR

6x silicon grommets M4 to M3
1x FR4 PCB Plate 36*36*1mm
1x Rubycon ZLH 35V/470uF (Low ESR)

Remark: F405-SE is update version Of F405-CTR,F405-CTR is stop production now

F405-SE descripiton:

MCU: 168MHz STM32F405RET6
IMU: MPU6000 (SPI)
Baro: DPS310 (I2C)
OSD: AT7456E (SPI)
Blackbox: MicroSD slot (SPI)
VCP & 6x Uarts, 1x Softserial_Tx supported
9x PWM outputs (7x Dshot compatible with BF/INAV)
2x I2C
3x ADC (voltage, current, RSSI)
4x RX6 pad(one per corner) for BLheli32 ESC telemetry
4x individual ESC power/signal pads
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
Built in inverter on UART2-RX for SBUS input
PPM/UART Shared: UART2-RX
Vbat filtered output power for VTX
Camera control: Yes
Smartaudio & Tramp VTX protocol: Yes
DJI FPV OSD protocol: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes

PDB Specifications

Input: 6~36V (2~8S LiPo) w/TVS protection
PDB: 4x35A (Max.4x46A)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
Current Sensor 184A (Scale 179 in INAV/BF)
Battery Voltage Sensor: 1K:10K
Firmware
INAV: MATEKF405SE
BetaFlight: MATEKF405SE
ArduPilot: MATEKF405-WING
Physical
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 36 x 46 mm
Weight: 10g

F405-CTR Item description:
Brand name: Matek Systems
Item name: BetaFlight F405-CTR
Size: 36x46mm PCB with 30.5mm mounting holes
Weight: 10g

FC Specifications:

MCU: 168MHz STM32F405
IMU: MPU6000 accelerometer/gyro (SPI)
Baro: BMP280 (I2C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on TX2, S5 or S6 optional
Camera control on S6 or DAC optional
Smartaudio & Tramp VTX protocol supported
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes

PDB Specifications:

Input: 6~30V (3~6S LiPo) w/TVS protection
PDB: 4x30A (Max.4x46A), 6 layers*2oz copper PCB
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.300mA for Spektrum RX
Current Sensor 184A (Scale 179)
Battery Voltage Sensor: 1:10 (Scale 110)
Features:

3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
6x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x pair I2C1 pads
1x Side-press button for BOOT(DFU) mode

F405-CTR description:

Matek MATEKSYS F405-CTR BetaFlight F405 STM32F405 Flight Controller Built-in Osd PDB 5V/2A BEC Current Sensor for RC Multicopter