New iFlight SucceX-D F7 TwinG 60A Stack with SucceX-D F7 TwinG V2.2 FC/SucceX 60A V2.1 Plus BLHeli_32 2-6S ESC for HD FPV system

SKU: EYVY7IF072PQ Category: Tag:

$175.00

996 in stock

Compare

Product Description

Description:

  • The SucceX-D F7 V2.2 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.

Features

  • Universal USB Type C connector instead of micro USB

  • Plug-and-Play. No need to solder tiny wires.

  • Supports BLHeli pass-through for easy ESC upgrade and configuration.

  • Designed to support DJI Digital FPV.

FC // SucceX-D F7 TwinG

  • MCU: STM32 F722

  • Gyro:MPU6000

  • Baro: DPS310

  • Blackbox:32MB

  • Betaflight OSD: YES

  • BEC: 5V 2.5A / 9V 2.5A

  • Current sensor scale: ?100

  • Inverter for SBUS input (UART2-RX)

  • Smartaudio & Tramp VTX protocol supported

  • Beeper pad : Yes

  • RSSI input pad: No

  • UARTs:5

  • Motor outputs: 8

  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)

  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)

  • BLHeli32 Telemetry:RX5

  • Input voltage:recommended 2-6S, MAX 8S

  • Firmware target:IFLIGHT_F722_TWING

  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets?φ3mm

  • Dimensions: ? 36*36mm

  • Weight: 8.1g

  • USB type-C

ESC // SucceX 60A V2 4in1

Top Features:

  • 8 layers single-board stacking PCB board

  • 4oz 1.6mm thick power board

  • 32bit STM32FO51K MCU,48kHz maximum clock speed

  • TDK MLCC Low ESR ceramic capacitors

  • Top grade metal MOSFET

Specification:

  • MCU:STM32F051

  • Up tp 48kHz PWM frequency

  • Capacitance: 470uF/50V

  • Current Sensor: Yes

  • Input: 2-6S LIPO

  • Constant: 60A / Burst: 80A

  • BlHeli32 telemetry: Yes

  • BEC: No

  • Supports up to Dshot1200, Proshot, Oneshot, Multishot

  • Target: iFlight-BL32-4IN1

  • Weight:14.4g

  • Mounting pattern:30.5*30.5mm/Φ3mm

  • Dimensions:43*39mm (including the power pads)

Package included:

  • SucceX-D F7 TwinG FC x 1

  • SucceX 60A V2 ESC x 1

Origin

CN(Origin)

Material

Metal

Recommend Age

12+y

Tool Supplies

Battery

Upgrade Parts/Accessories

Frame

RC Parts & Accs

Antennas

Size

30.5*30.5mm

Use

Vehicles & Remote Control Toys

Quantity

1

Technical parameters

Value 2

Model Number

SucceX-D F7 TwinG

Remote Control Peripherals/Devices

Remote Controller

For Vehicle Type

Airplanes

Four-wheel Drive Attributes

Assemblage

Wheelbase

Bottom Plate

There are no reviews yet.

Be the first to review “New iFlight SucceX-D F7 TwinG 60A Stack with SucceX-D F7 TwinG V2.2 FC/SucceX 60A V2.1 Plus BLHeli_32 2-6S ESC for HD FPV system”