NEW iFlight TITAN LH5 249mm 5inch Freestyle FPV Frame Kit with 5inch propeller with XING E 2208 pro Motor for DIY Racing drone

Product Description

iFlight TITAN LH5 249mm 5inch Freestyle FPV Frame Kit with 5inch propeller with XING E 2208 pro Motor for DIY Racing drone part

Package include:

1* TITAN LH5 Freestyle Frame

4*XING E 2208 MOTOR

4*Propeller

Description：

• The TITAN LH5 was designed for freestyle flying . It is also suited for a 5-inch propeller power system and flight controllers. With the 5-inch propeller power system, users have ensured a super great flying experience. Soft TPU material helps to protect the camera and antenna in the event of a crash.

• This TITAN LH5 stands for super-low which refers to the short standoffs and low top plate resulting in a “slammed” frame. Many pilots like the really low CG that slammed builds provide, but building them is usually a bit more complex due to the wiring requirements.

• You are able to mount 20x20mm and 30.5×30.5mm stacks in the front, VTX in the rear!

Features:

• Popular H style configuration, prop in View

• Easy-Swap arms

• Fits both 30.5x and 20x stacks

• Full 3K Carbon Fiber airframe with chamfered arm

• 249mm wheelbase, weight: 145.9g with TPU parts

Specifications:

• Weight: 145.9 (with TPU parts, and battery anti-slip pads)

• Wheelbase: 249mm

• Main body dimension: 201*147mm

• Bottom to top distance: 16mm

• Arm thickness: 6mm

• Bottom plate thickness: 3mm

• Top plate thickness: 3mm

• Upper plate thickness: 3mm

• Mounting Holes: 30.5*30.5mm

• Support camera size: 14*14mm

• Recommended motors: 22xx, 23xx

TITAN LH5 Freestyle Frame :

• 1 x TITAN LH5 Freestyle Frame

• 1 x Screw Bag

• 1 x TPU Camera mount adapters

• 4 x Arm guard/Motor mount

• 1 x TPU bottom plate front protective mount

• 1 x TPU bottom plate rear protective mount

• 1 x Battery Anti-slip Mat

• 2 x Battery Straps

XING E PRO:

Features

-High-strength 4mm Steel shaft

-N52H High-temperature magnets, NSK bearings

-16x16mm hole pattern

-Single strand copper winding

-Hex bolt shaft set screw

Specifications

-Configuration: 12N14P

-Stator Diameter: 24mm

-Magnets: N52SH Curved

-Bearing Size: 9x4x4

-Shaft Diameter: 4mm / Steel

-Base Mounting Pattern: 16x16mm M3 Thread

-Motor Dimension: 26.9×14.9mm

-Weight: 36.6g (150mm wires)

-Idle Current @12.6v (Io): 1.2 A

-Cells (LiPo): 2-6S

-Max Burst Current

-Max Power (W) 60s: 970W

-Internal Resistance (Rm): 60.3mΩ

-Motor Wire Length: 150mm / 20AWG