Ready to fly RTF 6 axis Tarot X6 Folding Retractable Pro 2.4G 10CH 960mm PIX PX4 M8N GPS DIY RC Hexacopter Drone

Product Description

Ready to fly RTF 6 axis Tarot X6 Folding Retractable Pro 2.4G 10CH 960mm PIX PX4 M8N GPS DIY RC Hexacopter Drone

Product is DIY Version, Unassembled Kit and NO Manual, Please take it into account before ordering.
If any Technical questions, Please message us but do not open dispute or leave negative feedback.
Note: The item do not include Battery!

Package listing:
Tarot X6 Frame x1
YH X5010 400kv Motor x6
Hobbywing XRotor 40A x6
1855 carbon fiber paddle x6
Holybro PIXHAWK4 Flight Controller x1
Holybro M8N GPS x1
GPS Folding stand x1
PM07 distribution board x1
Radiolink AT10 with Receiver and battery x1
A6 Plus Charger + Power Adapter x1
6S 160000Mah Battery x1
Flight control shock plate x1
5.8G 2500mw video transmitter x1
5.8G 7inch FPV Monitor
Hawkeye 8 camera + Control Cable x1
3-axis brushless gimbal x1
OSD data module x1
Xrock 915Mhz 1000mw data transmission module x1
Monitor Stand x1
12V voltage regulator module x1

Frame:

Symmetrical motor wheel base: 960mm
Propeller: 18inch
Single arm length: 392mm
Single arm weight: 113g
Main plate diameter: 328mm
Net height of landing skids: 395mm
Battery: 15C/22.2V/10000-2000mAh
ESC: 40A/6S
Max power:4000W
Hovering power: 1800W
Hovering time: 18 Min
Working temperature: -10 40
Net weight: 2.0Kg
Gross weight: 2.7Kg

ESC:

———————Hobbywing————————-

Item Name : Hobbywing XRotor-Pro-40A
Con.Current : 40A
Peak.Current (10s) : 60A
BEC: No
Lipo : 3S-6S
Parameter Option : DEO ( on/off )
Size and Weight :
Version A ( With Wire ) : 66×21.8x11mm ; 50g

——————-JMT——————-

1. Output: Continuous 40A, Burst 60A up to 10 Secs.
2. Input Voltage:Pentium-40A:2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
3. BEC:Pentium-40A: 3A / 5V (Switch mode).
4. Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.(BLM: BrushLess Motor)
5. Size: 55mm (L) * 28mm (W) * 12mm (H).
6. Weight: Pentium-40A: 35g.

Motor:

1, the use of a hidden motor shaft design, more effective protection of the motor shaft.
2, the use of a new type of propeller design, performance is more stable, demolition is more convenient.
3, the use of the 0.2mm stator, the load temperature lower, increase in efficiency.
Excellent workmanship, quality assurance, energy saving high efficiency
KV:410 KV
Shaft diameters: 4 mm
Weight:about 105 g (with leads)

Remote Control System:
1.Frequency: 2.4GHz ISM band (2400MHz~2485MHz);
2.Modulation mode: QSPK;
3.Channel bandwidth: 5.0MHz;
4.Spread spectrum: DSSS;
5.Adjacent channel rejection: >38dBM;
6.Transmitter power: 7.Operating Voltage: 8.6~15V;
8.Operating Current: 9.Control distance: 800 meters ground;
10.Channel: 10 Channel,8~10 channel are customizable;
11.Compatible model: Include all 120 degree and 90 degree swashplate helicopter,all fix wing and glider,five flying model;
12.Simulator model: under the simulator

Flight Controller:

– Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;
– Provide redundant power input and fault transfer function;
– 14* PWM/ actuator output;
– Bus interface (UART, I2C, SPI, CAN);
– Provide automatic and manual mode;
– Color LED lamp;
– Multi tone buzzer interface;
– Micro SD to record flight data;

Charger:

Operating voltage range: 11.0-18.0 Volt
Circuit power: Max .charge power 60W
Max .discharge power 5W
Charge current range: 0.1-6.0A
Discharge current range: 0.1-2.0A
Li Po/Li Fe/Li Ion Cells : 1-6S
NICD/NIMH cells: 1-15s
PB battery voltage: 2V- 20V
Net weight: 233g
Dimensions: 10.2×8.4×2.9cm

Caution for the battery:
Don’t over-charge, or over-discharge batteries.
Don’t put it beside the high temperature condition.
Don’t throw it into fire.
Don’t throw it into water.

Version with HobbyWing 40A ESC

Version with Hobbywing XRotor

40A ESC